Having a wired home network installation can be much more reliable, stable, and faster than a wireless one. Fortunately, today’s market offers a wide variety of Ethernet cable options, so you don’t have to rely on WiFi to connect to your modem or router. If you want some recommendations, first, we present you the AmazonBasics RJ45 Cat-6 Ethernet Internet Cable model, a 20 meter long Ethernet cable with a standard RJ45 and Category 6 connector with backward compatibility for other types of cables.
Second, you might consider the Jadaol Cat 7 Ethernet Cable. This best ethernet cables for streaming has a length of 10 meters long, shielding for the protection of internal wires, as well as halogen-free insulation for better data transmission. It’s Category 7, so you can work with high-speed home and business networks without any problems, as well as using a more stable frequency for connection.
Top 5 Best Ethernet Cables For Streaming – Reviews In 2020
Having a good quality Ethernet cable when making your home or professional connections is possible if, before choosing it, you take the time to evaluate its most important characteristics. In this way, your investment will be much more successful and practical. Below you will find a selection of attractive models with good value for money:
Rank #1: Jadaol Cat 7 Ethernet Cable
In the list of those that could be among the best ethernet cables for streaming for 2020 is the Jadaol Cat 7 Ethernet Cable . This network cable is Category 7, working at a frequency of 600 Mhz at 100 meters maximum guaranteed.
This quality enables the cable to transmit data at high speeds that can reach 10,000 Mbps, more than enough to meet the demand for connections from home and business networks.
The product has standard SFTP shielding which provides individual protection for each pair of copper wires, preventing interference from affecting transmission quality. So you can enjoy your connection speed to its full potential.
On the other hand, its RJ45 connectors are covered by both a rubber protector on the security hose and a metal cover around the connector.
Jadaol could become the best brand of Ethernet cables, so we want to present the advantages and disadvantages of its product:
It is a robust and robust design Ethernet cable with a black rubberized coating and yellow connectors for easy identification.
RJ45 connectors are made of rigid plastic but have a metal outer casing to extend their life.
Jadaol cable is Category 7, which is why it is capable of establishing demanding transmission connections, whether domestic or commercial.
Its capacity will allow you to use this Ethernet cable to connect computers, game consoles, projectors, televisions, and much more.
The length may not be very exact, which is why it is advisable to purchase the cable slightly exceeding the needs to avoid inconveniences.
Rank #2: AmazonBasics RJ45 Cat-6 Ethernet Internet Cable
For some users, Amazon Basics may have the best value for money Ethernet cable with their product L6LLA008-CS-R. This model has a length of 3 meters, so it is intended for short-range connections. However, it stands out that with your purchase you will get a total of five Ethernet cables so you can connect what you want.
Another aspect to highlight is that these are cheap Category 6 cables, that is, suitable for home network connections, as well as televisions, projectors, video and sound systems, video game consoles, and more. They are UTP type and work at a frequency of 250 MHz.
Depending on their capacity, these Ethernet cables can transmit up to 1,000 Mbps or 1 Gigabit per second and, since this is usually the maximum offered by internet companies, you should have no problem enjoying the full width of your band.
One of the cheapest options on this list is Amazon Basics, very useful for those who want to save money and also buy a reliable and durable Ethernet cable:
The most striking aspect of this Amazon Basics offering is that it includes a total of five Ethernet cables for the wired link between devices.
All cables have their respective RJ45 connectors installed and are transparent so you can verify their integrity.
They are Category 6, so they have what it takes to handle home networks of up to 1,000 Mbps internet speed.
The connectors have rubber protectors for the safety hose.
The length likely limits the use of these cables a lot, although you could purchase them longer depending on the availability of the manufacturer at the time of your purchase.
Rank #3: UGREEN Ethernet RJ45 Cat 7 Gigabit LAN Network Cable
Unless you are a computer expert, you may not know which is the best ethernet cables for streaming, and that is why we present you a Category 7 alternative that offers a wide transmission capacity for the connection of your home network.
Ugreen’s Ethernet cable can easily handle 10,000 Mbps networks at a frequency of 600 MHz, maintaining high connection stability, as well as preventing packet and information loss and is backwards compatible with cables of other categories.
Regarding its design, the cable is flat, being easy to install on the wall. Its length is 5 meters, although it could be purchased in other sizes depending on its availability. Some of the options are cables with a length of between 1, 2, 3, 10, 15, and 20 meters, so you can find the one that best suits the type of installation.
When you have doubts and don’t know which Ethernet cable to buy, the Ugreen version could be a practical and useful alternative to meet your needs:
Ugreen offers you a modern and attractive looking Ethernet cable with a flat design that makes it easy to handle, as well as a more discreet installation.
The cable is Category 7, being able to work seamlessly with wide range networks.
The RJ45 connector has a gold plating that will improve the connection between the pins of the Ethernet ports, both the cable and the device to which they are connected.
The connectors on both ends have their respective rubber protector to extend their useful life.
You must be careful when connecting and removing the cable since the rubber tab can get trapped under the hose and make the process difficult.
Rank #4: NANOCABLE 10.20.0202 Networking Cable
This type of crossover Ethernet cable may be what you need to make a direct and simple connection. The NanoCable is a Category 5E model, remaining within the UTP standard and capable of LAN use in home networks.
Perhaps one of its most striking aspects is based on its design which, unlike most Ethernet cables, has a red rubber coating, being quite striking. Also, it is highlighted that the coating has resistance to the spread of fire in the event of a fire. However, do not overlook the fact that it is 2 meters long, being an Ethernet cable for connections at a short distance between devices.
The RJ45 connector, on the other hand, is transparent and has its respective hose integrated to be able to adequately secure the Ethernet port where you are going to connect the cable.
In case you have a reduced budget, you can consider the Nano Cable option, as it may be the best ethernet cables for streaming for 2 euros or less:
The NanoCable model has a length of 2 meters and is red so you can quickly recognize it on your connection.
The Ethernet cable jacket offers low fire spread, being safer than other models.
It is Category 5E, which makes it suitable for home connections, whether for work, entertainment or online gaming.
It has the useful security hose that will help you both to put in and to remove the cable from the Ethernet connector of your equipment.
The RJ45 connectors are plastic and lack gold or metal plates to improve the link established between two devices, although they also offer a fairly stable connection.
How to use an Ethernet cable
If you have purchased an Ethernet cable and want some tips to install it correctly, here, we offer you methods recommended by users who managed to accommodate them within their home or office without problems to enjoy a more stable connection and without packet loss.
Check the connectors
Before taking any action, the first thing we advise you to do is check the condition of the RJ45 connectors on both ends of the cable. These must be properly protected, either with safety covers or rubber tips.
If they are transparent, note that each copper wire is in contact with the gold connectors and that there are no breaks in any of the wires inside the piece.
Unwind the cable
If you have purchased a model that is wound, it is very important that you unroll it with great care to avoid bending that could jeopardize the integrity of the copper wires.
Start first by measuring the distance between the devices you want to connect, so you know approximately how much cable you will need and how much you will have leftover. Try to buy a model with a length that exceeds at least a couple of meters the space required in case you need to move any of the equipment. Also, you can easily wrap the excess cable near one of the connected devices to hide it.
Secure it to the wall
Now that you have the necessary cable to make the connection, you will probably find a mess in your hallway. To avoid this, many users choose to simply secure the cable to the wall following the structure of the rooms using screws with plastic heads, better known as screws with clamps, or double-sided tapes. The latter is easy to use since you only have to remove the protective paper and put them where you want to glue the cable.
We advise you to place these locks approximately every meter of cable so that you can maintain the proper tension and avoid being too noticeable on the wall. Also, you can use a rigid plastic headed mallet to avoid damaging the surface, as well as the nail or screw clamp.
Installing covers or trims
In case you want to hide better or hide the wired connection of your equipment, you can use plastic covers. These can be purchased by the meter at hardware stores or online stores like Amazon.com.
However, you should know that you will have to install them before laying the cable since they are made up of two parts: one that serves as a compartment for the cable and another to close it.
Take the necessary covers according to the distance that must be travelled through the structure between one device and another and equip them with several centimetres of double-sided tape at the bottom.
Place each piece along the wall maintaining continuity. When finished, arrange the cable inside, keeping some tension to then place the cover and thus have a cubicle that will hide everything to maintain a more orderly style in your home or office.
If you think you need help to choose a good model of Ethernet cable, you’ve come to the right place. In this space, you can find a guide to buying the best ethernet cables for streaming with which it may be easier for you to find a good and cheap model.
Design and length
The design of the Ethernet cable includes aspects such as its colour and length, which can be very useful when making complex installations or identifying the cable between several connections to the same device. Therefore, it is one of the first characteristics that you should review in any comparison of Ethernet cables.
This appearance can vary from one model to another, either in terms of the colour of its lining material, as well as its connectors. If you choose a cable of a particular colour, it will be easier for you to carry out tasks such as installing it discreetly or finding it faster among other cables you may have connected.
Regarding the length, you should know that some categories of Ethernet cables have limitations regarding the distance in which they can transmit data without loss of packets, so before choosing which one to buy, it would not hurt to measure how many meters of cable approximately you will need.
In this way, you can avoid having to move your equipment to connect them or that you have too much material, and it is uncomfortable to hide.
The category of the Ethernet cable directly affects its price, since it practically determines the product’s ability to work with different transfer speeds, which is very important for home and commercial network connections.
Although currently, home network connections are not usually 10,000 Mbits download speed, there are Ethernet cables capable of working at this level, being useful for connections of all kinds.
All these aspects will give you a lot of freedom when choosing your Ethernet cable, but do not forget to check that it is of the appropriate category, which you can see printed directly on the entire length of the cable.
In general, for standard use, you would need an Ethernet cable that is at least Category 5 or 5E onwards, since these are the ones that work at a suitable frequency for data transmission, either when uploading or downloading, as well as they usually offer a length of approximately 100 meters without loss of data.
The data travels from one device to another through the interior of the Ethernet cable, which, in turn, is made up of a system of eight copper wires with individual cladding, which can be twisted in different standards. However, for use in networks, UTP is the most conventional.
Internal copper cables are usually separated into pairs and colours, facilitating their identification so that they can be installed in the appropriate position inside the RJ45 connector according to the standardized rule. However, depending on the type of cable, it can offer different protection methods for these wires, which must remain without interference to avoid packet or signal loss.
Generally, you can find Ethernet cables with special coatings to protect them from breakage or the elements of the weather. Still, there are also models with internal security, made up of screens and aluminium meshes that cover the cables. In this way, the interference of other electronic equipment is prevented from affecting their performance.
When it comes to Ethernet cables, you need to make sure they have RJ45 connectors. To identify this type of connector, check that the interior has integrated support for eight copper wires and that it has the dimensions and adequate shape to enter a standard Ethernet port. Likewise, this information is printed directly on the cable so that you can easily identify it.
However, one detail that you can consider when choosing your Ethernet cable taking into account its connector is whether it has a gold plate or not. Plating is generally recommended as they offer better connectivity and overall performance. Although if it is for domestic use, the regular ones will suffice.
Last but not least, cable manufacturing materials. As you may know, some options are designed for outdoor installations. In these cases, the Ethernet cable jacket must be resistant to ultraviolet rays, snow, rain, and others to guarantee the protection of the wires.
In addition to this, taking into account the materials used in the manufacture of the connector, as well as its base, will give you a better idea of the resistance of the cable that you are interested in buying.
Frequently Asked Questions
Q1: How to connect my PC to the internet by Ethernet cable?
To connect a computer to the internet using an Ethernet cable, you must first consider whether it is a desktop or laptop computer. In the first case, the Ethernet port is usually located in the computer tower, while in the second, on the sides.
You will only have to insert the RJ45 connector into the Ethernet port of your computer until you hear the click indicator sound and the other end directly to the port on the modem to make a wired internet connection.
Q2: What is the way to know if my Ethernet cable works?
One of the easiest ways to check if an Ethernet cable is damaged in case you notice a decrease in the quality of your internet speed is using the same computer.
The first step is to click on “Start”, write the word “Run”, and in the list, you will see the application that you will select appear with the left button of your mouse. Now a small window will open where you must type the letters “CMD” and then click on the “OK” button.
When doing this, a DOS operating system window should open where you will have to type the following command: “ping 127.0.0.1” without the quotes and press the “Enter” key. If the ping test result shows data packet loss, your Ethernet cable has likely been damaged, and it is time to think about replacing it.
Q3: How many wires does an Ethernet cable have?
A standard-use Ethernet cable that works with RJ45 connectors has a total of eight copper wires. These are divided into pairs, which carry information through the length of the cable. Each wire is covered with a rubber coating of different colours according to the 100BASE-T4 standard to be able to identify them more easily and thus know in what position to insert them into the connector. Also, they have a UTP braiding style that may or may not be screened.
Q4: What is an HDMI cable with Ethernet for?
HDMI cables with Ethernet are a relatively new product and are known as HDMI 1.4 cables. They have a total of 19 pins and a smaller size than the standard HDMI connector.
This type of cable, in addition to being able to transmit audio and video as before, can now also transmit data, so you will have the possibility of connecting your TV to the internet, either using an Ethernet or WiFi cable and this, in turn, will be able to link to the network any device you have connected to its HDMI port.
Thanks to this, you will not have to use the individual connection system of each equipment, and, also, with this cable, you will have audio return available so you can connect a TV to an amplifier, for example.
Q5: How to pass an Ethernet cable from one room to another?
There are many options to pass an Ethernet cable from one room to another in your home. You can choose an internal installation, but for this, you will have to buy a shielded cable that prevents electromagnetic interference and are more expensive so that a standard installation might be more recommended.
And nothing is simpler than just connecting the desired devices through their respective Ethernet ports and accommodating the edges of the wall to prevent them from getting in the way. You can use bras, double-sided tape, or any accessory of your choice.