7 tips for using a coaxial cable in your home

Coaxial cable or coaxial cable is familiar to most homeowners and property managers. It is the standard type of cable used for all cable television and Internet connections used in homes and rentals. 

Here are some tips from homeowners, landlords, property managers, and anyone who is running coaxial cable through a residence to provide telecommunications connections.

1. Think first

Before you install your coaxial cable, think about what spaces will most conveniently accommodate it. 

It helps in trying to route the cable through unused spaces, rather than high-traffic areas where it is likely to get in the way.

 Good planning is a big part of almost any cable run project, and taking a few minutes to think before the provided installation will yield the best results.

2. Leave some slack

Cable runners should always measure able to ensure that it reaches the desired destination. 

Experts recommend leaving an extra couple of feet to relieve any strain on the cable during installation.

3. Observe studs and other obstacles on the wall.

 Running cables often pierce through walls to make indoor installations more efficient by creating a direct route. 

When you do this, it’s critical to avoid wall studs, as well as electrical components, pipes, and other obstacles. 

Some improper drilling can even cause injury, so pay special attention to this part of the installation.

4. Find cheaper surfaces to fix supports

When someone runs the cable through a room, they may decide to use metal or plastic brackets to keep the cable at the edge of a space and aid in cleanliness. 

But it is important to think about what kind of household surfaces you want to screw the brackets on. 

Avoid marring the surfaces of expensive wood products or old surfaces with supports and find more disposable surfaces that handle these fasteners to preserve value for future renovations.

5. Evaluate exit options

When running a cable to an outdoor cable, they often tempt cable runners to simply run the coaxial cable through an open door or window. 

However, this can be a very inconvenient setup over time, especially when the cable obstructs the closing of doors or windows in cold weather. 

In these cases, it is worth running the cable a longer distance in an area where installers can route it outside without sacrificing the overall insulation of a room or building, especially in colder climates.

6. Color code cables

If you’re running a single cable, identification can’t be a big deal. If you are running multiple cables or connecting cables to an outside source, it may be well to provide color coding for easy identification.

7. Verify the legality of multiple cable splits


Those who carelessly divide cables into multiple residential spaces may find that this process comes back to haunt them later.

 Observe the legal aspects of splitting a cable connection for aspects of your legitimate marine installation.

The tips above will help cable installers avoid some common problems when renovating a home or other property for coaxial cable connections.

Leave a Comment